Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you set the IP address to the Ethernet port on the M340 PLC's BMXP34 2020/2030?


    The addressing of the Ethernet port is done by the 2 rotary switches on the back of the PLC. There are 4 ways to obtain the IP address:
    1. By Stored Device uses applications configured IP address.
    2. By BootP Device gets an IP address from a BootP server.
    3. By Clear IP Device used default IP address based on the MAC address.
    4. By Tens and Ones Rotary Switches Used to define the default device name of the module to obtain an IP address from a DHCP server.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance