Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do I configure text display in Vijeo Designer ?

    To configure a text display in Vijeo Designer follow the instruction below.

    How to setup a text display.
    1. Using a text editor, create a text file in .txt format

    · In the text file, insert two colons to identify the start of a text block. The two colons will not appear in the text display.

      • Text file

    2. Save the text file. Select Unicode encoding when saving the file.

    3. In the Navigator window's Project tab, open the Data File folder and select the text icon to open the Text File Editor

    4. In the Text File Editor, click the FileName row, and click the File Selection icon to display the Open dialog box and select the file created in step 1. Alternatively, you can type the path of the text file in the File Name field.
    When you select the text file, the file name (without the file extension) is displayed in the Alias column. Change the alias name as required.
    5. Specify the storage location on the target machine for the text files.

    6. In the Navigator window's Project tab, select the panel where you want to place the Text Display.

    7. In the Toolchest tab, select the Text Display folder.

    8. Drag and drop the Text Display to the panel, and resize as necessary

    9. In the Property Inspector, change the text display properties as follow:
    Note: The FileName is the alias name given to the text file in step 4

    With a corresponding value in the BlockNumberVariable , the block message in the text file will appear.

    Value 0
    Take of the latch and remove the
    cartridge cover

    Simulation image for value 0

    Value 1
    Open the left side of the cartridge and
    remove part A

    Simulation image for value 1

    Value 2
    Set the opening of part A facing

    Simulation image for value 2


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance