in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Connection to a Meter through a 3rd party gateway device using ION Setup

    Issue
    User wishes to connect to a meter through a 3rd party gateway device using ION Setup.

    Product Line
    3rd Earty Ethernet Gateway
    ION meters

    Environment
    ION Setup

    Resolution
    The following steps outline the procedure for connecting to a meter through a 3rd party gateway device using ION Setup:

    1. Start up ION Setup in Network mode (i.e. the "Single ION Device Configuration Mode" should be unchecked when logging in).
    2. Right click on the and select Insert Item.
    3. Select Site and click OK.
    4. For the Comm Link, select Ethernet and for the Link Type, select Ethergate connection.
    5. Under the Remote Info tab, set the IP Address and IP Port to that of the 3rd party gateway device.
    6. Right click on the newly created gateway and select Insert Item.
    7. Select Meter and click OK.
    8. Select the appropriate meter Type and enter the proper Unit ID for the meter.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance