Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where to locate ION Offline Meter Files

    Where to locate ION offline Meter Files?

    Product Line 
    ION 7400, ION7x50, ION8650, ION8600, ION8500, ION8400, ION8300, ION8800, PM8000

    User wants install offline templates for ION meters. 

    Installing ION meter offline templates 

    Offline meter files provide a way to create a meter templates for ION meters without having to connect directly to a meter. Once an offline meter file is configured it can be saved. Then, the next time that a user connects up to an ION meter, the saved template can be pushed to it. 

    The following ION meter templates are available for ION Setup 3.0:

    The latest version of templates can be downloaded from the following link: 

    The latest versions of offline meter files are uploaded to the link provided below:

    NOTE: Please select the correct meter type, firmware version, and file type and for your application. 

    In order to access the offline file using ION Setup, first save the appropriate file from the link above to your computer.

    Open ION Setup 3.0 in Power User Mode and select the check box next to "Single ION device configuration mode". This will provide you with an option to open a saved offline firmware to edit.

    For additional instructions please reference the "Using Offline Programming" section (pages 52-54) of the ION Setup User Guide which can be accessed at the following link:

    Also, if necessary, refer to FA212374 for instructions on how to open ION Setup in Power User Mode if not prompted to open single device mode when launching ION Setup.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance