Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    ION Setup 3.0 displays incorrect realtime KWH for CM3s and CM4s and the Peak Demand reset fails

    Goals and Symptoms

    Issue
    1. ION Setup 3.0 scaling is incorrect for CM3000 and CM4000 energy readings. It is supposed to be showing the kWh values but it is actually reporting WH values. This is causing a digit to be truncated.

    2. When attempting to reset the peak demand, an error occurs showing "Exception response" and the reset does not occur.

    Causes and Fixes

    Cause

    This will be corrected in the next build.

    Resolution

    This has been corrected in the latest version of ION Setup, please find the latest version of ION Setup from FA212816

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance