Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to format disk on chip (DOC) on a CM4000/3000.

    How to format the disk on chip of a CM3000 or CM4000 series meter

    Product Line

    Configuring Hardware

    When formatting of the chip is required

    Caution: Remember that if this CM is host to an ECC21 that all web pages will be lost.

    The procedure to format the DOC is as follows. Using a modbus read/write utility:

    1. Setup Command Result Pointers:
      • Write 8020 to register 8017
      • Write 8021 to register 8018
      • Write 8022 to register 8019
    2. Write 9020 to register 8000 to open an editing session.
    3. Verify commands:
      • Verify register 8017 reads 9020
      • Verify register 8018 reads 0
    4. Write 7010 to register 8000 to format the DOC
    5. Verify commands:
      • Verify register 8017 reads 7010
      • Verify register 8018 reads 0
    6. Write 1 to register 8001 to save changes.
    7. Write 9021 to register 8000 to close the editing session.This will cause a meter reset and the DOC will be formatted after the meter is reset
    Note: After formatting the DOC, all files must be reconfigured using ION Setup or PME.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance