Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the power supply specifications for the Twido Modular Controller?

    The following table provides power supply information for the Modular controller.

    ITEM SPECIFICATIONS
    Power supply voltage Rated power voltage; 24 vdc
    Allowable range; 20.4 to 26.4 vdc
    Failure depends on quantity of used inputs and output points. Generally, failure is detected when voltage drops below 20.4 vdc, stopping operation to prevent malfunction.
    Inrush current flow at power-up 50 Amps maximum
    Power supply wiring UL1015 AWG22 (0.64 mm) or UL1007 AWG18 (1.02 mm)
    Make the power supply wiring as short as possible.
    Ground wiring UL1015 AWG22 (0.64 mm) or UL1007 AWG18 (1.02 mm)
    Do not connect ground wire in common with ground wire of motor EQUIPMENT.


    Note: The Twido Product line is obsolete and has been replaced by the M221 line, for more information on this contact your local distributor or Schneider Electric sales office.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance