Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can you have more than 1 DRUM SEQUENCER running at the same time in a Twido Controller?

    Goals and Symptoms

    To show how to have more than one Drum sequence running at the same time. See attached file for a running demo of 2 Drum sequences running at the same time.

    Causes and Fixes

    When running more than 1 drum sequencer in a program at the same time it is required that you do not use the same registers in both. The below is showing a %DR0 and a %DR1. %DR0 is using the %Q reference using 8 bits for each sequence.


    %DR1 is using %M reference using 8 bits for each sequence

    Attachments

    (Removed File URL: 211560_4FEA/Drum.xar)(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/74750d444d8b3253c1257b75005a405d/fl_block_5/0.C4?OpenElement&FieldElemFormat=gif)

    NOTE: The Twido line is obsolete and the M221 is the direct replacement for this for more information contact your local distributor or Schneider Sales office.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance