Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Communication loss between the TSXETG100 ethernet gateways and all ethernet networks.


    Every 5 minutes this device drops off all ethernet networks.
    TSXETG100 Version 3.000 Firmware Upgrade
    This firmware version provides improved validation of the IP Address, and the IP Address / Subnet Mask combination.
    Resolves ARP cache issues and improves web diagnostics.
    To properly update the TSXETG100:
    1. Transfer the version 3.000 firmware file (eg03000.bin) to your computer.
    2. Via FTP, copy the eg03000.bin file from your computer to the root directory of the TSXETG100.
    Do not remove power until programming is complete. Once the file transfer is complete, the TSXETG100 will automatically reboot.
    Refer to the TSXETG100 users guide if you need more information
    3. Verify that the download was a success by browsing the Firmware Version in the Gateway Information section of the Diagnostics page.
    Note. During firmware updates, communication to serial devices through the TSXETG100 is not available.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance