Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Is the 'A' or 'B' PLC designation selectable in a Unity 140CPU67160 Hot Standby system?

      Yes. As of firmware version 3.00-00-42 the 'A' or 'B' designation can be selected by using the LCD panel.
      The setting can be found by navigating to the PLC Operations / Hot Standby..
     
    *** Previous to firmware version 3.0 the 'A' and 'B' designation was determined by the MAC address found on the lower front of the PLC.
        With both PLCs on-line, the lowest MAC address was designated the "A" unit.


    Legacy KB System (APS) Data: RESL207391 V1.0, Originally authored by DaSo on 02/14/2012, Last Edited by DaSo on 02/14/2012
    Related ranges: Modicon Quantum

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance