Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you enable the Ethernet/IP profile on the Connexium TCSESM managed switches?

    Goals and Symptoms

    To explain the steps used to enable the Ethernet/IP profile on the Connexium TCSESM managed switches.

    Facts and Changes

    The Connexium TCSESM managed switches must be at a minimum firmware version 4.1 for this feature.

    Procedure

    First, log into the Connexium TCSESM managed switch as an administrator via the web pages.
    Next, expand the Advanced heading on the browser tree and select Ethernet/IP. (see screenshot below)



    Next, check the box next to Ethernet/IP to Enable the profile. (Step 2)
    Finally, click the Set button to add to the switch configuration. (Step 3)

    Remember to also save this configuration change so that this feature will be enabled after a power cycle.
    To save this configuration change, select Load/Save on the top of the browser tree under Basic Settings.
    Then click Save. (see screenshot below)


     


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance