Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What causes an 'OL9-1600 Not logged in to controller' error in Concept?

    This is typically a modbus timeout error.

    • Verify that the transmit and receive buffers are set to High in the PC's COM1: port parameters.
    • Try to connect to the PLC in ASCII mode at 2400 baud rate.
    • Is the laptop running off a low battery?
    • If the PLC is a Momentum, look for a bent pin.
    • Are Allen Bradley drivers enabled?
    • It may be necessary to jumper out the handshaking (DTR/DSR) in the cable. The modified pinouts are included in the attached files.

    Compact_momentum_RJ45 to DB9.zip DB9 To DB9 Pinout.zip

    Legacy KB System (APS) Data: RESL198297 V2.0, Originally authored by DaSo on 04/17/2009, Last Edited by DaSo on 02/27/2013
    Related ranges: Concept

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance