Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    ProWORX 32 returns a 'Runtime 13 type mismatch' error.

    Goals and Symptoms

    The purpose of this resolution is to provide information about the problem of a 'Runtime 13 type mismatch' error
    getting returned when ProWORX 32 is started.
     

    Facts and Changes

    A Runtime Error 13 can be the result of one of the following four (4) problems.

    • The "layout.acf" file is corrupted. You can try deleting the file. The file can be found under the PROWORX\32 folder.
    (The file automatically gets recreated when ProWORX 32 starts.)
    • The "prwx32.ini" is corrupted. You can try deleting the file. The file can be found under the PROWORX\32 folder.
    (The file automatically gets recreated when ProWORX 32 starts.).
    • There is a problem with the authorization. You can try to re-authorize the software.
    • The 'comct332.ocx' file has been overwritten with either an unsupported or older version by a third party software
    installation (i.e., Rosemount AMS software, Square D SMS software, etc.). ProWORX 32 installs version : 6.00.8450.
    An unknown or older version of the 'comct332.ocx' file could cause ProWORX 32 to crash with a Runtime Error 13.
    Causes and Fixes


    If you also have either the Rosemount 'AMS' software or Square D 'SMS' software installed, it is most likely that
    the 'comct332.ocx' is either an unsupported or older version. The problem can be resolved using the following steps;

    1.) Open a command prompt window
    2.) Change the path to the Windows\System32 directory
    3.) Type the following command to unregister the ocx file.

    regsvr32 -u comct332.ocx

    4) Locate and rename the 'comct332.ocx' file to 'comct332.ocx.old'.

    5) Copy the latest version of the '.ocx' file into the windows\system32 directory.

    COMCT332.OCX

    6.) Open a command prompt window
    7.) Change the path to the Windows\System32 directory
    8.) Type the following command to register the '.ocx' file.

    regsvr32 comct332.ocx

    Note: Windows 98 and Windows ME users should be able to locate the 'comct332.ocx' file under the 'Windows\System'
    folder.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance