Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What would cause the Modbus Plus lights to flicker on the BM85C002 when there is no communications directed to the Modbus Plus addresses?

    If someone has programmed a xmaster port on a BM85C002 and communicates from the master devices into the BM85C using addresses of the other RS232 slave ports. The communications checks all addresses until it finds the correct address and it will also check the Modbus Plus network and cause the lights to flicker. One way to stop the Modbus Plus port from being polled is to use the internal addresses 71,72,73 and 74 of the slave ports or setup the E1 and E2 table for communicating routing.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance