Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where can the DFB used with the Momentum 170AEC92000 module be found in Concept v2.5 or greater?

    The AEC DFB is located in the Concept/Dat folder with the name AEC.ASC. The file must be imported into Concept by following the procedure detailed below:

    1. Move the file AEC.ASC to the Concept/DFB folder.
    2. Open the Concept Converter utility.
    3. Select FILE.
    4. Select IMPORT.
    5. Select the file AEC.ASC.
    6. Hit "OK".
    7. After successful completion of the import, the AEC DFB will be added to the DFB library, making it available for use in logic.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance