Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where to configure communications to an ADVC controller in WSOS5?

    User needs to know where in WSOS5 to communications settings are configured

    Product Line
    ADVC Reclosers


    The communications must be configured to communicate to an ADVC controller.

    This menu is located: Customize > WSOS communications > Select the communications protocol/method (Typically Direct) and configure the parameters accordingly.

    In most cases Direct will be used and the only parameter that must be configured is the Comms Channel. The Comms Channel is the communications port used on the PC, this may be verified using the Device manager built within Windows.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance