in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why can't I change the password of my ComBox?

     ComBox Password Change

    In order to change the ComBox password we have to take the following steps:

    1. Logging to the ComBox with the default username (admin) and password (password)
    2. Once we access the ComBox we need to go on the settings page of the ComBox see picture below

    3. The next step is to select Setup on the left side of the screen and then select "Change Admin Password" see picture below

    4. After we select this, a prompt will appear requesting to input the old password and the enter (twice) the new password. Please notice that a message saying password was not able to be change will appear, this is caused because the ComBox needs to be rebooted before it can take effect. 
    5. To reboot the ComBox is simple, first select "General" then click on the REBOOT. Close Combox and re-open after a few minutes, as the login change takes that long to refresh.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance