Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How is automatic restart configured on the ATV21 / ATV212 drive?

    Video: How is automatic restart configured on the ATV21 / ATV212 drive?

    Product Line:
    ATV21 and ATV212

    All serial numbers for ATV21 and ATV212

    Certain faults can be automatically reset after the cause has cleared.  The drive will then restart the motor.

    Set F303 to any value, from 1 to 10, indicating the number of attempts to clear the detected fault.  A value of 0 disables the feature.
    If the fault clears, the drive will restart the motor if the run command is active.
    If the fault does not clear after all attempts are made, the drive will require a manual reset.

    The first clear is attempted 1 second after the detected fault occurs.  Each subsequent clear attempt adds 1 second to the time interval between attempts.


    See the ATV212 Programming Manual, page 135 for further details.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance