Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to program the ATV61 or ATV71 drive for reference switching between 2 channels?

    Issue:  
    How to program the ATV61 or ATV71 drive for reference switching between 2 channels?

    Product Line: 
    ATV61, ATV71
     
    Environment
    All

    Cause:
    Setup instructions request

    Resolution:
    CtL ( Command menu )
    Set ref 1 ch (Fr1) to the desired reference for the (hand) position
    FuN menu ( Application Function ) 
    Reference Switching
    Set Ref 1B sw (rCb) to  the desired logic input ( LIx)
    Set Ref 1B ch (Fr1b) to the desired reference for the (auto) position
    Operation: Hand position LIx = not active (Fr1)  and LIx = active (Fr1b)

    Example:  
    Wants to run from a potentiometer wired to AI1 in Hand or Local mode and wants to run from a 4-20mA signal on AI2 when in Auto or Remote mode.  
    Has his Hand/Auto selector switch wired so in Hand LI3 is off and in Auto LI3 is on.
    Goto Menu 1.6 [Command] and program Ref 1 Channel to AI1.
    Goto Menu 1.7 [Application Function] - Reference Switch submenu and program Ref 1B switching to LI3 and Ref 1B Channel to AI2.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance