Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you change the ATV61 BACnet device name?

    BACnet controller is reporting an error related to duplicate names on the system.  How can the name be changed?

    Product Line:
    ATV61 drives with VW3A3315 or VW3A3319 BACnet option card.

    ATV61 drives with BacNet option card

    The object name that holds the device name can not be modified and always is ATV61.

    The ATV61 Bacnet cards (VW3A3315 or VW3A3319) produced after November 2014 have Firmware version V1.1ie09. 
    This version automatically assigns the device name to ATV61, followed by the 3 digit address set by the DIP switches on the option card (called the MAC address).
    As long as there are no duplicate addresses, there will not be any duplicate names.

    Prior to this firmware release, it was not possible to change the device name for the ATV61.
    For older versions,  the workaround is to assign a device name directly to the drive via the 7 [Display Config] -- 7.1 [User parameters] -- [device Name].
    This name will appear in the BACnet controller under Deivce Object Type -- "descripition".  Please check the attached example screen capture.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance