Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Need assistance selecting the parts required for single phase input to a VFD to run a 3 phase motor.

    Issue:
    Needs to run a 3 phase motor with 1 phase input voltage.

    Product Line:
    ATV61
    ATV71
    ATV312
    ATV320
    ATV12
    ATV630

    Environment:
    All

    Cause:
    Cusotmer only has single phase input power but needs to run a 3 phase motor.

    Resolution:
    Several of our drives have been tested and approved to accept single phase input power to run 3 phase motors.
    In most cases the drives must be derated to handle the increased current on the input bridge and increased ripple or noise on the DC Bus.
    In some cases input line reactors may be required or may allow higher SSCR ratings.

    Consult the appropriate Quick Start Guide Annex.  These documents also provide fuse and circuit breaker information.

    ATV61
    NOTE- product was discontinued in 2016 (Variable Torque applications):http://www.schneider-electric.us/en/download/document/S1B86981/

    ATV71
    (Constant Torque applications):http://www.schneider-electric.com/en/download/document/S1B86988/

    ATV312
    NOTE - product to be discontinued in 2017 (Constant or Variable Troque applications):http://www.schneider-electric.us/en/download/document/S1B16328/


    ATV32
    NOTE - product to be discontinued in 2017 (Constant or Variable Troque applications) :http://www.schneider-electric.com/ww/en/download/document/S1B39941?showAsIframe=true

    ATV320
    (Constant or Variable Torque applications):  http://www.schneider-electric.com/en/download/document/NVE21777/

    ATV12
    (Constant or Variable Torque applications): http://www.schneider-electric.com/en/download/document/S1A58684/

    The ATV212 is not capable of supporting single phase input applications.

    For any other application requirements consult following 3rd party website (Bonitron):
    http://www.bonitron.com/drive-schneider.html#regen3

    ATV600 
    NOTE - Only recommended on single phase for pump application (Altivar Process Drive) : https://www.schneider-electric.com/en/download/document/EAV64300/
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance