Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Is there a minimum load required to show info on the Micrologic Trip Unit displays for Powerpact P and R frame, and Masterpact NT/NW breakers?

    Determine minimum load required to show data on Micrologic Trip Unit displays

    Product Line:
    Circuit Breakers

    Micrologic A, P and H Trip Units used in Powerpact P, R, and Masterpact NT and NW Breakers

    The trip units 3.0A, 5.0A, 6.0A, 5.0P, 6.0P, 5.0H and 6.0H require a minimum of 20% load going through the breaker to internally power the display and show data, however the back light will not be illuminated.  When externally powering the trip unit with 24Vdc on terminals F1 (neg.) and F2 (pos.) the display will also show data below 20% load, and the back light will be illuminated.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance