Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What does an OLF fault code mean on the ATS22 Soft Starters?

    What does an OLF fault code mean on the ATS22 Soft Starters?

    Product Line:
    Altistart ATS22


    OLF means motor overload fault

    To reset the fault you can go into the Pro menu and find ITH parameter.  Set this to OFF and power cycle to get rid of the fault.
    When power is reapplied, go back to the same parameter and turn it back to value desired for class protection.
    Check the motor for blockage, phase rotation etc.
    Check the ACC and tHP settings in the SET menu. If ACC= 10 seconds or more, try adjusting the tHP to class 20 or class 30.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance