Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How is basic programming performed on an ATS48?

    How is an ATS48 set up for standard basic programming?

    Product line:
    Altistart 48

    All models, all serial numbers

    Basic programming set up for the ATS48 soft starters.

    SET menu:
    IN= FLA motor amps
    ACC= acceleration
    STY= type of stop (f=freewheel, d=ramp stop, b=intel braking)
    DEC= deceleration [only appears if Sty= d (ramp stop)]
    ILT=current limit 400%  or 4X your motor current is default value.

    DRC menu:
    CLP= Off (Torque Control).  This is important if the ACC/DEC times have to be followed exactly.

    Reference ATS48 programming manual S1A37491

    The following video demonstrates this initial setup procedure:


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance