in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    ATV61/71: How is a 2 wire, 4-20mA transducer wired to the drive?

    Issue:  
    How is a 2 wire, 4-20mA transducer wired to the drive?

    Product line:
    Altivar ATV61 and ATV71

    Environment:
    All models, all serial numbers 

    Cause: 
    A 2 wire transducer needs to be wired to the drive for a pressure feedback signal.  
     
    Resolution:
    Wire the 2 wire transducer as follows:
    The input of the transducer typically requires 24Vdc.  This may be wired to the VFD terminal +24 or to an external power supply.
    The output of the transducer is wired to the VFD terminal AI2.
    Program the AI2 Configuration for 4-20mA.  See attached file.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance