Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why is the ATV61/71 not following the 4-20mA signal wired into AI3+ on the VW3A3202 extended IO card?

    Why is the drive not following the 4-20mA signal wired into AI3+ on the VW3A3202 extended IO card?

    Product Line:
    Altivar ATV61 and ATV71

    All ATV61 and ATV71 with VW3A3202 option board

    Analog signal not working

    AI3-/ AI3+ is a differential current input.  You must jumper AI3- to the com terminal  before wiring in your 0 to 20mA or 4 to 20mA signal.
    Check ref 1 channel to see if its programmed for AI3.
    Check resistance between AI3+ and com with no power applied to the drive you should measure 250 ohms.
    Check the polarity between AI3+ and com make sure the signal is not inverted.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance