Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where can I download SoMove and DTM files? What is the USB to RJ45 cable required to connect SoMove to the drive using the ModBus port?

    Where can I find a link for SoMove?
    What cable is used?

    Product line:
    Variable Frequency Drives and Soft Starts  

    All models, all serial numbers   


    Below are the Links for SoMove Software and DTMs for AC Drives and Softstarts. 

    (Somove 2.6)

    (Altivar DTM files for the ATV61, ATV71, ATV12, ATV212, ATV312, ATV32)
    (Altivar Process 600 DTM files)

    (Altivar Process 900 DTM files)

    (Altistart DTM files for ATS22 and ATS48)

    All other:
    Click on Optional Filters
    Select Document Type Group: Software/Firmware
    Select a Product Category - Variable Speed Drives and Softstarts
    Select a Product Sub-Category - Low Voltage AC Process Drives
    Select Product Range -
    -  Altivar 61 (i.e. for all Altivar AC Drives DTM)
    -  Altistart 48 (i.e. for Altistart Softstarts DTM)
    -  Process
    -  etc.
    Click the Search button
    Download the DTM files for Altivar drives and the stand alone file for Somove.
    WinZip or 7-Zip Extraction software may be needed for compressed/zipped files.  If needed you can Download Free version 7-Zip from;
    The  USB to RJ45 cable part number is TCSMCNAM3M002P
    The SoMove 
    software is free online, however, you will need to purchase this cable to connect your PC to products via the resident Modbus port.
    The USB cable is not required if the Drive has an available Ethernet communication port available. 
    The drivers for the USB cable are included as part of the SoMove software.
    When installing SoMove, make sure the USB cable is not connected.  Only after the installation completes should you connect the cable to  the PC.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance