Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What does the BRF fault mean on the ATV71 drives?

    Issue:
    ATV71 drive is getting brake feedback fault (BRF)

    Environment:  
    All models, all serial numbers   

    Cause:
    The brake contact feedback is too one after the command to run is issued.

    Resolution:
    This is a brake feedback fault.  The brake feedback contact does not match the brake logic control.
    This function is available under 1.7 Brake logic control submenu.  
    If BRH b2 is set to 0 the reference is enabled at the end of the brake release time.  If BRH b2 is set to 1 then the reference is enabled when the feedback from brake contact enables a logic input and at the end of the brake release time.
    - check the feedback circuit and brake logic control.
    - check the mechanical state of the brake.


     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance