Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    PowerChute Business Edition loses communications with HP ProLiant server

    Issue:
    PowerChute Business Edition loses serial communications with HP ProLiant server

    Product:
    PowerChute Business Edition (PCBE)

    Environment:
    HP ProLiant server with Integrated Lights-Out (iLO) enabled

    Cause:
    Integrated Lights-Out (iLO)

    Solution:

    HP did provide knowledge base document http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c00843255&sp4ts.oid=398220
    Or for continuous data transfer through the Serial COM port, use the procedures provided below to reset iLO:

    1. Power on the server.
    2. Browse to the Integrated Lights-Out (iLO) Web-based interface IP address using a Web browser.
    3. Login to Integrated Lights-Out (iLO).
    4. Click on the Administration tab.
    5. Click on the Network Settings link in the left side frame.
    6. Click on the Apply button at the bottom of the Network Settings web page.
    7. iLO will reset and the COM port will release.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance