in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How can you copy a old ATV31 program into a new ATV312 drive?

    Can you copy an ATV31 drives program into the new ATV312 drive?

    Product Line:
    Altivar ATV312, ATV31


    Needs to use the old file from his ATV31 and put that program into his new ATV312 drive.

    Yes, you can copy the old ATV31 file into the new ATV312 drive.
    You will need to set up your new ATV312 to act like a old ATV31 by setting the  ArE parameter to 31E or 31A.
    The differences are as follows.
    31A has the knob on the face of the old ATV31 drive.
    31E does not have the knob only the 4 buttons on the face of the drive.
    To copy the old program from the ATV31 into the new ATV312 drive you will need the original ATV31 remote keypad, Powersuite software V2.6 or the Multiloader.

    See the attached pdf document for notes.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance