Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How can you program the ATV212 drive to follow 0-10vdc speed signal on VIA and start/stop via terminal control?

    Issue:
    How can you program the ATV212 drive to follow 0-10vdc speed signal on VIA and start/stop via terminal control?

    Product Line:
    Altivar ATV21 and ATV212

    Environment:
    All

    Cause:
    Wants to use VIA for 0-10vdc speed control and start stop via 2 wire control thru the terminal inputs.

    Resolution:
    Switch VIA SW100 setting:  Set the switch on the main circuit board to U for an 0-10vdc input signal on VIA.
    Wiring= 0-10vdc signal to VIA and CC    two wire start dry contact is wired between P24 and F.
    Programming set FNOD= 1 VIA CNOD= 0 terminal control,  F111= 2  for 2 wire control.
    Basic programming
    uLu= motor voltage
    F415= normal motor current
    F417= normal motor RPMs
    thr = normal motor current



     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance