Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to program the ATV31 or ATV312 analog output for 4-20mA, 0-20mA or 0-10 V signal?

    Issue:
    How to program the ATV31 or ATV312 analog output for 4-20mA, 0-20mA or 0-10 V signal?
     
    Product line:  
    ATV31, ATV312
     
    Environment:  
    All range All serial number    
     
    Cause:
    How to get a feedback signal form the ATV312?

    Resolution: 
    Steps to program the analog output of the ATV31 or ATV312
     1). Press the enter key to REF
    2). Turn dial to I-O menu Press enter
    3). Turn dial to AO1t Press enter
          The following selections are available, choose one and press enter
              a). 0A – Current – 0-20mA configuration (use terminal AOC)
              b). 04 – Current – 4-20mA configuration (use terminal AOC)
              c). 10U – Current – 0-10 V configuration (use terminal AOV)
    4). Press esc to AO1t
    5). Turn dial to d0
         The following selections are available for the analog output, choose one and press enter
          a). OCr (motor current) – 20 mA or 10 V corresponds to twice nominal drive current
          b). OFr (Motor Frequency) – 20 mA or 10 V corresponds to the maximum frequency(tFr)
          c). Otr (Motor Torque) - 20 mA or 10 V corresponds to twice nominal motor torque
          d). OPr (Power supplied) – Power supplied by the drive, 20 mA or 10 V corresponds to twice the drive power.
    6). Esc out of all menus. Drive is ready to run once the analog signal wiring is connected.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance