in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you wire up a 24vdc push pull encoder to the VW3A3407 encoder option card for the ATV71 drive?

    Issue:
    How do you wire up a 24vdc push pull encoder to the VW3A3407 encoder option card for the ATV71 drive?

    Product Line:
    ATV71 with VW3A3407

    Environment:
    All 

    Cause:
    Encoder wiring 

    Resolution:
    The pin outs may vary depending on the encoder type and connector type.

    Basic setup is as follows:
    A from the encoder goes to A on the encoder card
    B from the encoder goes to B on the encoder card
    A not and B not are tied together and jumper to 0V on the encoder card.
    +24vdc goes to +V encoder card
    0V goes to 0V on the encoder card


     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance