Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Configure virtual machine shutdown on standalone VMware ESX and ESXi hosts protected by PowerChute.

    Issue:
    How to configure Virtual Machines to shut down when a standalone ESXi host is commanded to shut down by PowerChute.

    Product Line:
    PowerChute Network Shutdown
    PowerChute Business Edition 

    Environment:
    VMware ESX and ESXi 

    Cause:
    Informational

    Solution:
    You can use the "Virtual Machine Startup/Shutdown" feature of ESXi and ESX to gracefully shutdown VMs when the host is commanded to shut down. VMware tools must be installed on each VM.

    To configure VMs to shut down with the host:
    1. Log in to the ESXi host via the vSphere client. On the Configuration tab and under Software, select "Virtual Machine Startup/Shutdown"
    2. Click on Properties
    3. Enable the option "Allow Virtual Machines to start and stop automatically with the system"
    4. Change the Shutdown Action to "Guest Shutdown"
    5. Use Startup Order to specify the order in which the VMs are shut down and started
    6. Click OK to accept the changes.

    For more information see VMware knowledge base document 1008182
    Note: The Virtual Machine Startup/Shutdown feature is deliberately disabled for hosts that are part of a High Availability (HA) Cluster.

    For assistance with ESXi 6.5 see https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.vm_admin.doc/GUID-5FE08AC7-4486-438E-AF88-80D6C7928810.html

    PowerChute Business Edition is not supported in a HA environment. PowerChute Network Shutdown version 3.1 and above supports HA environments. For help on how to configure PowerChute Network Shutdown in a HA environment please review Application Note 180 or the VMware User Guide.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance