Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Will my APC Back-UPS Automatically restart following the return of utility power?

    Issue:
    Will my APC Back-UPS Automatically restart following the return of utility power?

    Product Line:
    All APC Back-UPS

    Environment:
    All APC Back-UPS

    Cause:
    When the UPS runs on battery operation and the battery becomes discharged, the UPS automatically switches off.

    Resolution:

    Note: The UPS will continue to recharge its battery in the Off state, as long as there is some voltage present on the electrical circuit. 


    When adequate power is restored to the UPS (and is within the operating voltage range of the UPS) it will restart in online operation.

    This is independent of PowerChute software being installed or not. An attached computer may also be configured to restart following a complete discharge of the UPS, which has resulted in the UPS turning off.
    The computer must have the option for powering on when power is available, chosen in the systems BIOS for this work. See Kbase FA159550 for information concerning BIOS settings. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance