Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Models of Pelco cameras that have been tested with version 3 NetBotz and BotzWare 4.X

    Issue:

    Models of Pelco cameras that have been tested with version 3 NetBotz and BotzWare 4.X

    Product Line:

    NetBotz
    Pelco Cameras

    Environment:

    NetBotz NBWL0455 and NBRK0570 
    4.X botzware
    Pelco camera support

    Cause:

    Not all Pelco cameras have been tested with NetBotz 4.0 botzware.

    Resolution:

    Please note that the NetBotz 3xx and NetBotz NBRK0450/0451 do not support the Pelco integration.


    The initially supported Pelco cameras from version 3.x firmware are:
     
    Pelco Camera Model Product Family Firmware Version Tested
    IP3701H-2 IP Unavailable
    IP110-CHV9 IP110 Camclosure® Unavailable
    SD4N-W0 Spectra Mini IP Unavailable



    The following is a list of cameras and Pelco firmware that has been tested with BotzWare version 4.0. The Sarix line of Pelco cameras have been added to testing:
     
    Pelco Camera Model Product Family Firmware Version Tested
    IXS0C Sarix IX 1.7.19.9080-A1.5842
    IXE20DN Sarix Enhanced 1.7.19.9081-A1.5843
    IX30DN Sarix IX 1.7.8.9080-A1.5288
    IMSOC10 Sarix IME 1.7.41.9260-O2.6725
    SD4N-W0 Spectra Mini IP  1.2.15

     
    With the release of Botzware 4.2, the following list of additional Pelco cameras and firmwares have also been tested:
     
    Pelco Camera Model Product Family Firmware Version Tested
    IMSOC10 Sarix 1.8.2
    IM10C10 Sarix 1.8.2
    IX30DN Sarix IX 1.8.2
    D5118 Spectra HD 1.8.2
    TXB-N Spectra IV IP 1.8.2
    DD4N-W0 Spectra Mini IP 1.2.15
    IP110 IP110 Camclosure® 1.0.47
    IP3701 IP 1.0.10

    The following is a list of cameras and Pelco firmware that has been tested with BotzWare version 4.4:
     
    Pelco Camera Model Product Family Firmware Version Tested
    IM10C10 Sarix 1.9.2
    IMS0C10 Sarix 1.9.2
    D5118  Spectra HD 1.9.2
    IME119 Sarix Enhanced 2.1.2.0.8280-A0.0

    The following is a list of cameras and Pelco firmware that has been tested with BotzWare version 4.5.3:
    Pelco Camera Model Product Family Firmware Version Tested
    IL 10 Sarix Unavailable
     
    The following is a list of cameras and Pelco firmware that has been tested with BotzWare version 4.6.3:
    Pelco Camera Model Product Family Firmware Version Tested
    IJP121-1IS Sarix 1.16.37


    Important Note:

    Pelco Sarix Pro models that were originally listed as supported do not correctly update the resolution settings presented to NetBotz appliances. NetBotz can no longer support Sarix Pro models due to this limitation of the Pelco camera and they have been removed from this compatibility matrix.

     
     
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance