Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Wrong status if wrong sensor is plugged into sensor port on Netbotz Rack Monitor 550 with an Internal SP150

    Issue:

    Wrong status if wrong sensor is plugged into sensor port on Netbotz Rack Monitor 550 with an Internal SP150

    Product Line:

    NetBotz

    Environment:

    NetBotz version 3 appliances and sensors

    Cause:

    In some instances, sensors can be connected to only specific sensor ports.

    Resolution:

    "The attached XL sheet lists all the issues that may be seen if the wrong sensor is plugged into a port on the Netbotz 550.

    This attachment references the following sensors:
    Temp
    Temp / humidity
    Smoke
    Vibration
    0-5 volt cable
    Spot leak
    Rope Leak
    Beacon
    Dry contact
    Ethernet
    Door
    A-Link


    plugged into the following ports:
    Universal Sensor port 1-6
    Rope port
    Beacon port
    Ethernet port
    A-Link port

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance