Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Configuring Post-only Mode for Netbotz Version 2 and 3 Appliances

    Issue:

    Configuring Post-only Mode for Netbotz Appliances

    Product Line:

    NetBotz.

    Environment:

    NetBotz version 2 and 3
    NetBotz Central 2.x
    InfraStruxure Central
    StruxureWare Data Center Expert.

    Cause:

    NetBotz posting configuration. This may be necessary if the NetBotz appliances can not be polled by StruxureWare but the NetBotz appliance can post.  

    Resolution:
     
    Appliances can only be placed in Post-only mode from the Advanced View. To place an appliance in Post-only Mode perform the following steps: 
     
    1. Select “Tools” then “Advanced” then “Post Only Mode”.
    2. Enter the hostname or IP address of the NetBotz Central the appliance will be "posting" to as well as the appropriate authentication data. Enter a username and password that has administrator level privilege on the NetBotz Central or StruxureWare Data Center Expert server..
    3. When all of the information is correctly entered, click on the OK button. Once the OK button is pressed, the following screen will appear with status information.
    4. Click on the "Post to INfraStruxure Central now" button to check the connection and ensure the information is correctly entered.
    NOTE: If the initial post is successful then the stats will change to "Registered". If the initial post is not successful, check the appliance log under "Tools" -> "Appliance Log" to see the failure information in detail.

    NOTE: NetBotz Central can not communicate with version 3 appliances.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance