Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to configure NetBotz version 2 external sensors?

    Issue:

    Netbotz External Sensor Installation Tips

    Product Line:

    Netbotz

    Environment:

    NetBotz 2.x

    Cause:

    Configuration tips.

    Resolution:

    Adding sensors that connect to the external sensor ports require configuration before they will function. Follow these basic guidelines when adding sensors to the external sensor ports:
    • Physically connect the add-on sensor using and noting the external sensor port(s)
    • Under “Configuration” in the Advanced View, click on “Sensor Pods”. Select the appropriate Sensor Pod where you attached the sensor
    • Click “External Ports” and select the appropriate sensor and the port that it’s plugged into, then name it appropriately
    • Once that’s done, you can then select the “Sensors” button and edit the thresholds for that device accordingly
    • It’s always a good idea to test the sensors and cabling before fully deploying the solution on-site.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance