Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the VFD RS485 Communication Error on my NetworkAIR FM/IR40?

    Issue: What is the VFD RS485 Communication Error on my NetworkAIR FM/IR40?
     
    Product line: Network Air FM
     
    Environment: Data Center Cooling
     
    Cause:
     
    Resolution:
    "In controller firmware v6.11.0 a new feature was added to generate alarms on loss of communications with the VFDs. The FM controller continuously polls data from the VFDs, one data point at a time. There is an error counter for each piece of data. The error counter is incremented if the FM controller receives either an incorrect response or no response to a query; else the error counter is decremented. When the error on any one piece of data reaches the value of three, then the alarm is generated. The alarm is cleared when the error counts of all data items have a value of zero. The error count is never allowed to go below zero or above three.

    One possibility is that SW2, located under the RJ45 connector on the VFD, needs to be in the ON position. It is also possible that one or both VFDs have the wrong address programmed into them. To check this you'll need to connect the VFD keypad to each VFD and check the value of parameter H31. The leftmost VFD should have a value of 1 and the other should have a value of 2.




     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance