in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Smart-UPS SRC 5k, 6k, 8k and 10 KVA FAQ

    Issue:

    SRC 5,6,8 and 10 KVA FAQ

    Product Line:

    Smart-UPS

    Environment:

    All SRC models, All Serial Numbers

    Cause:

    Product Information

    Resolution:

    Q: Do the SRC 5-10 KVA UXI Models turn on without battery when the Input Power is available?
    A: Yes

    Q: What is the use of Parallel Kit(SRCPK001 & SRCPK002)?
    A: The Parallel Kit allows you to connect the two UPSs' output supply to the load via a common AC bus bar. Both the UPSs share the load equally but if one  fails (either through developing a fault or being taken out of service for maintenance), the other UPS will take over powering the load. This only supports the SRC series of SmartUPS.

    Q: What are the advantages of the SRC 5-10 KVA LCD Display?
    A: The user can get the clear and correct information of the UPS operation condition such as the load, input/output voltage, input/output frequency, and battery voltage, etc.,The Output Voltage can be set through LCD: 220 / 230 / 240 Vac.

    Q: Can we get information about the charging facility for the SRC5/6/8/10KVAUXI Models?
    A: Boost charge & floating charge are available and there are 4 segments of charge current optional to be set: 1.4A/3A/6A/8A, in accordance with the actual condition to keep the battery at full state, thus extending the battery life.

    Q: When do I need to choose a Service Bypass Panel?
    A: In addition to the 1+1 Parallel redundancy system, the Customer can also look into a service bypass panel which will give you a wrap around bypass. This means that if the Customers needs to take a UPS out of operation for any reason, they can use the wrap around bypass to bypass the UPS without taking their load down.

    Q: What are the advantages of the APTF10KW01 Isolation Transformer?
    A: APTF10KW01 is used as filters, isolating the UPS and connected equipment from any outside utility line fluctuations or interference.  APTF10KW01 step-down transformers are used to convert a higher input voltage to a lower output voltage which might be more fitting for certain environments or system configurations.

    Q: What is the battery voltage that is required for SRC 5 and 6 KUXI Models?
    A: Requires a 192 Vdc battery system.

    Q: What is the battery voltage that is required for SRC 8 and 8 KUXI Models?
    A: Requires a 240 Vdc battery system.  

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance