Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to configure the SRC 5,6,8 & 10 KVA UPS Models External Battery Packs using the LCD display

    Issue:

    Configuration of SRC battery packs via the LCD display

    Product Line:

    Smart-UPS Online

    Environment:

    All SRC models, All Serial Numbers

    Cause:

    Batteries need to  be manually added to the UPS in order for the unit to properly calculate runtime

    Resolution:
      Procedure for Configuring the number of battery strings through the display interface or LCD menus:


    1. Press the Enter key to select the main menu.

    2. Scroll down to configuration.

    3. Press the enter key to select configuration. 

    4. Scroll down to battery setup by number of battery pack. 

    5. Enter the correct number of attached battery packs.


    In order to setup the external battery packs, please key in as (Ah of battery) x (total number of batteries).

    Example 1:   If there are 16pcs of 5Ah battery in series (for 5kVA), the total Ah number is 5Ahx16pcs=80Ah.
    Example 2:   If there are 16 pcs of 100 AH batteries in series(for 5 KVA), the total AH number is 100 AH x 16 pcs=1600 AH
    Example 3:   If there are 2 strings of 16pcs of 5Ah battery in series (for 5kVA), the total Ah number is 5Ahx16pcsx2 strings=160Ah.
      
    The 80Ah inside the table is the default setting for 5kVA/6kVA (1 EXB: 16pcs of 5Ah battery)
    The default setting for 8kVA is 140Ah (1 EXB: 20pcs of 7Ah battery)
    The default setting for 10kVA is 180Ah (1 EXB: 20pcs of 9Ah battery).
      
    If “Ext total battery Ah” is set as 0, it means there is no external battery connected. 
     
            

    "

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance