Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Use of SmartUPS RT or SRT units for frequency conversion


    Issue:

    Use of SmartUPS Online units for frequency conversion

    Product Line:

    Smart-UPS RT, SRT

    Environment:

    All international SURT and SRT models, All Serial Numbers

    Cause:

    Product Information

    Resolution:

    Note:
    Use of Smart-UPS Online products for frequency conversion is not officially supported or tested. Proceed at your own risk.

    Frequency conversion (IE:: Input 50 Hz and Output 60 Hz) is available only on the international versions of the Smart UPS Online and not on the domestic units.
    International units can be identified by the ""I"" at the end of their part number (IE: SURT5000XLI). Domestic models will end with a ""T"" (IE: SURT5000XLT).
    In order for an International Model SmartUPS to be used for frequency conversion, the output must be set to 200v, 220v, or 230v.
    Frequency conversion is not available with 208v or 240v output.
    Domestic units will only operate online if the Input frequency range matches the Output frequency range configured in the Network Management Card or LCD interface.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance