Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can I install multiple APC SmartSlotAccessory Cards in one UPS?



    Issue

    Can I install multiple APC SmartSlotAccessory Cards in one UPS?


    Product Line
     
    • APC Branded UPS models with the following model prefixes or names (that contain a DB-9 style serial port)
      • SURT
      • SURTA
      • Symmetra Power Array
      • Symmetra RM
      • Symmetra LX
      • Symmetra PX (excluding PX 250/500)
      • SU
      • SUA
      • SUM


    Environment
    • All serial numbers
    • All firmware versions


    Cause

    Depending on the UPS type, it may only offer one SmartSlot. If a user requires multiple SmartSlot cards to be installed, this articles what is available to accomplish that and any associated requirements.


    Resolution

    APC does manufacture a SmartSlot Expansion Chassis for multiple APC SlotSlot Accessory cards, though this chassis is considered a legacy product. The part number for the Expansion Chassis is AP9600. The AP9600 can be used with any aforementioned UPS containing an existing SmartSlot.

    The AP9600 attaches to the DB-9 serial port on your UPS system. You can daisychain multiple Expansion Chassis units off of one UPS. However, with two or more Expansion Chassis, you will need a 24VDC power adapter for each additional Expansion Chassis. APC does offer a 24VDC power adapter. The part number is AP9505.

    APC also offers the Triple Chassis, part number AP9604BLK. The AP9604BLK contains three additional SmartSlots and is also considered a legacy product. When using all three slots or daisy-chaining the Triple Chassis, the 24VDC power adapter will be needed.

    Please see the following link for installing multiple SmartSlot accessories in a supported UPS system: http://www.apcmedia.com/salestools/ASTE-6Z5QFC/ASTE-6Z5QFC_R1_EN.pdf

    Note, knowledge base article ID FA156132 may also be helpful with installation of SmartSlot accessories in general.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance