Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How do you remove the coil on TeSys LC1F F series contactors?

    How do you remove the coil on TeSys LC1F F series contactors?

    Product Line: 
    TeSys F Line Contactors and Accessories

    North American Products

    ​Would like to remove the coil from an F line contactor

    • Ensure power is off
    • Remove wires to the coil
    • Locate the blue or orange button* at the edge of the metal enclosure on the line side of the contactor
    • Be sure there is sufficient clearance beside the contactor to allow the coil to slide out of its location. The coil assembly is the full width of the contactor.
    • Locate the slot in that blue or orange button.
    • Depress and hold the button with a flat bladed screwdriver.
    • Slide the button toward the outside of the enclosure. It is part of the coil assembly. The coil will move with it.
    To replace the coil, slide the replacement coil into place. The button should pop into the cutout on the coil enclosure. This action will securely lock the coil into the proper position.

    *Current design devices will have a blue button, the older design devices have orange buttons. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance