Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    When selecting bus bar for GV2, or U-line starters, what does "pitch" mean?

    When selecting bus bar for GV2 or U-line starters what does "pitch" mean?

    Product Line:
    IEC starters

    GV2 and U-line starters

    Product description and installation

    "Pitch" describes the spacing in millimeters between the attached devices. Specifically it is the dimension from the left side of the first device to the left side of the next device. The basic GV2 or U-line starter is 45mm in width, some auxiliaries are 9mm in width, some are 18mm in width.

    For starters with out add on modules you would can use 45 pitch, the width of the GV2 or U-line starter. For starters with a left mounted auxiliary module you would use 54 pitch, and for starters with both left and right mounted auxiliary module you would use 72 pitch.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance