Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can multiple motors be connected to one solid state soft starter?

    Can multiple motors be connected to one solid state soft starter?

    Product Line:
    ATS48 ATS22


    Application requirement

    Size the soft starter for the total full load amps of all motors to be connected.
    Provide separate overload protection for each motor.

    For ATS48: Make sure the CLP parameter in the drC menu is set to OFF.
    For ATS22: Make sure SSC parameter in the Adj menu is set to OFF.

    Motor connections to the soft starter output should not be made or broken while the soft starter is running.  The resulting sudden change in current will cause problems and possible damage to the soft starter or other equipment.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance