Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How is the ATV31 set up to operate by remote keypad?

    Issue:   How is the ATV31 set up to operate by remote keypad?
    Product Line:   ATV31
    Environment:  All
    Cause:   Remote keypad operation
    Resolution:   With the VW3A31101 remote keypad kit installed, go to menu CtL and set parameter LCC to YES.
    NOTE:  LCC can only be accessed if the drive controller is equipped with a remote keypad display, and if LAC = L1 or L2.
    This function enables control of the drive with the STOP/RESET, RUN, and FWD/REV buttons on the remote keypad display.
    The speed reference is given by parameter LFr in the SEt- menu.
    Only the freewheel stop, fast stop, and DC injection stop commands remain active on the terminal block.
    If the remote keypad display is not connected, the drive controller will lock on an SLF fault.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance