Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    With the ATV58, ATV61, or ATV71 analog output set for output frequency, why does it only provide 17ma when the drive output frequency is 60hz?

    Issue:   With the ATV58, ATV61, or ATV71 ATV312 ATV630 ATV930 analog output set for output frequency, why does it only provide 17ma when the drive output frequency is 60hz?
     
    Product Line:   ATV58 ATV61 ATV71 ATV312 ATV630 ATV930
     
    Environment:  All
     
    Cause:   Ouput frequency not ascaled correctly
     
    Resolution:   
    The analog output provides a signal proportional to the motor frequency estimated by the drive controller.
    The minimum configured value corresponds to zero.
    The maximum configured value of the analog output corresponds to the maximum frequency setting (tFr), not the high speed setting (HSP).
    The default tFr setting is 20% higher than the HSP. (72 hz for 60 hz applications, 60 hz for 50 hz applications)
    Need to set the tFr parameter to 60 hz to match the HSP setting of 60 Hz.
    Lowering the maximum frequency setting may result in nuisance Overspeed faults.



     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance