Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What causes a ATV58 to receive an error code Err9

    Issue:   What causes a ATV58 to receive an error code Err9
     
    Product Line:   ATV58
     
    Environment:  All
     
    Cause:   ERR9
     
    Resolution:   Error code #9 is an internal error in the keypad display software.
    If the keypad display is remotely mounted, electrical noise may be present.
    Cycle power on the drive controller to see if resets.
    If there is another drive on the site exchange the keypads to see if the problem stays with the keypad or drive. If the problem stays with the drive replace the control board. Replace keypad if problem goes away.

    It may be best to send the entire drive into the repair depot for service. Contact any SquareD distributor for assistance.


     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance